Chevrolet Camaro 1993-1996 Door Insert Reupholstery Kit

This product is handmade in Europe and can take up to eight weeks to arrive. No returns or exchanges accepted.

What This Is

Custom-sewn leather covers that you staple onto your existing 1993-1996 Camaro lower door inserts, replacing the factory carpet. They do not include the inserts.

What's Included

• Included: 2 covers, one for each door.
• Not included: door inserts, staples, adhesive, or tools.

Before You Order

• Fits 1993-1996 Camaro. Have a 1997-2002? Use our 1997-2002 door insert kit.
• Recovering the upper door panel too? Pair it with our 1993-1996 door panel kit.
• It's made to order, so it can take up to 8 weeks to arrive and can't be returned or exchanged. Please double-check your year, fitment, and colors before ordering.
• International shipping: every piece ships from Poland, so a $15 international shipping charge applies to each item at checkout.

Installation

Difficulty: Moderate  |  Tools: flathead and Phillips screwdrivers, panel clip tool or needle-nose pliers, staple gun, hot glue gun

You'll remove each door panel, pop out the carpeted insert, staple the new cover onto its cardboard backer, and reinstall.

▼ Click to Open / Close Step-by-Step Installation Guide (15 Steps)

Photos show a 1997-2002 door; the process is the same.

Step 1. Remove the screws holding the door panel to the door. Some are hard to see, so check the photo closely.

Step 2. Remove this screw.

Step 3. Remove this screw.

Step 4. Remove the screw at the window switch panel, lift the switch panel out, and unplug its connectors, including the small door light.

Step 5. Use needle-nose pliers or a panel clip tool to remove the plastic fastener near the bottom front edge of the door, close to the speaker cover.

Step 6. Pull up firmly on the door handle while popping the panel clips outward. Push up and out with both hands so nothing catches.

Step 7. The panel unhooks from the window ledge as it lifts.

Step 8. The door panel is off.

Step 9. Flip the panel over and peel back the glued-on insulation until you can reach the cardboard insert.

Step 10. Carefully pry back the clips holding the insert. A small flathead or knife helps.

Step 11. With the insert out, peel the factory carpet off the cardboard. It's held with glue.

Step 12. Line the new cover up on the cardboard.

Step 13. Staple it down close to the inside edge, pulling it tight as you go.

Step 14. Press the insert back into the clips on the door panel.

Step 15. Re-glue the insulation (a hot glue gun works well), let it dry, and reinstall the door panel by reversing the removal steps.

Leather care: apply a leather conditioner with UV protection every 4-6 weeks to keep it from drying out and cracking.

Options & Pricing

Choose your material, 50+ colors, and 38 stitching colors in the options above. Add-on prices are added in the cart.

Material

• Regular Leather
• Perforated Leather
• Nappa Leather +$27
• Genuine Alcantara +$45
• Faux Alcantara
• Carbon Fiber Vinyl

Style

• Quadruple Thread +$9
• Stripes +$14
• Double Racing Stripes +$27

Quadruple stitching color applies to the outer lines of thread.