Coil Spring Spacer

1967–1981 Camaro 3/8in Coil Spring Spacer

Newly reproduced coil spring spacer that installs between the front lower control arm and spring. Lifts the front end slightly while maintaining a factory-correct look. Fits 1967–1981 Camaro.

$13.99

Control Arm

1970–1981 Camaro Front Lower Control Arm Bumper

Direct replacement for GM# 10068783. Engineered to meet or exceed OEM specifications. Fits 1970–1981 Camaro. Sold individually.

$13.99

Ball Joint

1967–1969 Camaro Lower Ball Joint

High-quality lower ball joint engineered for 1967–1969 Camaro and Firebird. A critical front suspension component for steering precision and handling safety.

$27.99

Ball Joint

1967–1969 Camaro Upper Ball Joint

Replacement upper ball joint for 1967–1969 Camaro and Firebird. Pairs with the lower ball joint for a complete front suspension rebuild.

$27.99

Sway Bar

1967–1969 Camaro Rubber Sway Bar End Link

OEM-correct rubber sway bar end link for 1967–1969 Camaro. Restores front sway bar function to reduce body roll and improve cornering feel.

$18.99

Sway Bar

1974–1981 Camaro Rear Sway Bar Links Pair

Replacement rear sway bar link pair for 1974–1981 Camaro. Attaches to the floor above the rear end with pressed-in bushings included. Sold as a pair.

$201.99

Coil Spring Insulator

1967–1983 Camaro Front Coil Spring Insulator

Precision-engineered rubber coil spring insulator for 1st, 2nd, and 3rd Gen Camaro (1967–1983). Reduces NVH and restores factory-correct spring seating.

$29.99

Suspension Bump Stop

1967–1970 Camaro Front Suspension Bumper – Steering Knuckle

Steering knuckle support bump stop for 1967–1970 1st Gen Camaro. Replaces the OEM rubber bump stop that prevents metal-to-metal contact at full suspension travel.

$27.49

Shock Grommet

1976 Camaro Shock Absorber Stop Grommet

Rubber stop grommet (also called a spacer or bump stop) for 2nd Gen 1976 Camaro. Ensures proper shock absorber travel and reduces suspension noise.

$14.99

Lowering Springs

2010–2015 Camaro PFADT Series Lowering Springs – V6 & V8

PFADT Series lowering kit engineered for 5th Gen Camaro LS, LT, SS, Z/28, and ZL1 (2010–2015). Lowers ride height while improving handling balance without sacrificing street manners.

$376.99

Sway Bar Set

2016–2024 Camaro Control Sway Bar Set

Matched front and rear sway bar set for 6th Gen Camaro LT, SS, and ZL1 (2016–2024). Engineered to deliver maximum cornering performance with balanced body roll reduction.

$781.99

Suspension Controller

2010–2024 Camaro Suspension Logic Electronic Shock Modules

Plug-and-play ESD (Electronic Shock Delete) module for 5th Gen ZL1 and 6th Gen Camaro. Eliminates the suspension control check engine light when installing aftermarket shocks. Fits 2012–2015 ZL1 and 2017–2024 ZL1.

$473.99

Air Suspension Kit

2016–2023 Camaro Performance Front Air Suspension Kit

Full air suspension front kit engineered specifically for 6th Gen Camaro LS, LT, LT1, SS, and ZL1 (2016–2023). Dial in your exact stance with adjustable air pressure. Sold as a front kit.

$1,581.99

Air Suspension Kit

2016–2023 Camaro Performance Rear Air Suspension Kit

Rear air suspension kit for 6th Gen Camaro LS, LT, LT1, SS, and ZL1 (2016–2023). Pairs with the matching front kit for a complete air suspension build. Sold as a rear kit.

$1,581.99

Suspension Controller

1982–2002 Camaro WirelessAir Control System V2 w/ EZ Mount

Wireless on-board air compressor system compatible with any brand of aftermarket air spring. EZ Mount version for easier installation. Compatible with 3rd and 4th Gen Camaro (1982–2002).

$1,131.99

Air Suspension Kit

2010–2015 Camaro Performance Front Air Suspension Kit

Front air suspension kit engineered for 5th Gen Camaro LS, LT, SS, Z/28, and ZL1 (2010–2015). Fully adjustable height for the perfect stance on every occasion.

$1,481.99

Air Spring Kit

1982–2002 Camaro Air Lift 1000 Air Spring Kit

Adjustable air helper springs for 3rd and 4th Gen Camaro (1982–2002). Easy to install with no drilling required. Provides a safer, more comfortable and adjustable ride.

$181.99

Shock Absorber

1967–1969 Camaro Street Performance Shock Absorber

Belltech Street Performance shock absorber engineered for 1st Gen Camaro (1967–1969), including Base, RS, SS, and Z28 trims. Provides improved ride quality and handling over worn OEM shocks.

$105.99

Shock Absorber

1970–1981 Camaro Street Performance Shock Absorber

Street Performance shock for 2nd Gen Camaro (1970–1981), covering Base, SS, Z28, LT, Rally Sport, and Berlinetta. Drop-in replacement that improves ride quality and handling response.

$105.99

Lowering Springs

1967–1969 Camaro Muscle Car Spring Set

Belltech lowering coil springs for 1st Gen Camaro Base, RS, SS, and Z28 (1967–1969). Engineered to provide the visual stance you want with the spring rate needed for performance driving.

$266.99

Lowering Springs

1970–1992 Camaro Muscle Car Spring Set

Lowering coil springs spanning 2nd and 3rd Gen Camaro (1970–1992), including Base, SS, Z28, LT, RS, IROC-Z, Berlinetta, and Sport trims. Great option for a classic pro-street stance.

$302.99

Sway Bar

1993–2002 Camaro Front Anti-Sway Bar

Performance front sway bar for 4th Gen Camaro Base, RS, and Z28 (1993–2002). Reduces body roll and improves corner entry feel without affecting straight-line ride quality.

$415.99

Leaf Springs

1967–1981 Camaro Muscle Car Leaf Spring Set

Lowering rear leaf springs for 1st and 2nd Gen Camaro (1967–1981). Re-engineered arch provides a proper spring rate for a lowered stance. Fits Base, SS, Z28, RS, LT, and Rally Sport trims. Sold as a pair.

$332.99

Drop Spindle

1967–1969 Camaro 2-Inch Drop Spindle Set

Industry-pioneering drop spindle set for 1st Gen Camaro Base, RS, SS, and Z28 (1967–1969). Lowers the front end 2 inches while retaining factory control arm geometry and brake hardware.

$592.99

Shock Absorber

1967–1976 Camaro B6 Front 36mm Monotube Shock

Bilstein B6 performance monotube shock for 1st and early 2nd Gen Camaro (1967–1976), covering Base, RS, SS, LT, and Z28. Designed to pair with OE factory springs for a direct performance upgrade.

$153.99

Shock Absorber

1993–2002 Camaro B6 Front 46mm Monotube Shock

Bilstein B6 front shock absorber for 4th Gen Camaro Base, RS, Z28, and Z28 SS (1993–2002). The 46mm monotube design delivers immediate, consistent damping for street and track use.

$230.99

Shock Absorber

2010–2015 Camaro B6 HD 46mm Monotube Shock

Heavy-duty Bilstein B6 monotube shock for 5th Gen Camaro LS, LT, and SS (2010–2015). Yellow finish identifies the B6 HD series — engineered for spirited driving while maintaining everyday comfort.

$205.99

Strut Assembly

2010–2015 Camaro B6 HD Front Right 36mm Monotube Shock

Bilstein B6 HD front right shock/strut for 5th Gen Camaro LS, LT, and SS (2010–2015). Precision-engineered monotube damper for direct OEM replacement with performance gains.

$397.99

Shock Absorber

2016–2024 Camaro B6 Rear Monotube Shock

Bilstein B6 rear monotube shock for 6th Gen Camaro LS, LT, LT1, and SS (2016–2024). An essential upgrade for drivers replacing worn OEM dampers or building a more responsive suspension setup.

$128.99

Shock & Spring Kit

1998–2002 Camaro Z28 B12 Pro-Kit Suspension Kit

Complete front and rear suspension kit pairing Bilstein Performance dampers with Eibach Pro-Kit springs. Fits 4th Gen Camaro Z28, Z28 SS, and Base (1998–2002). Lowers and firms the suspension in one kit.

$1,285.99

Control Arm

1967–1969 Camaro Upper A-Arms (Polyurethane) – Black Hammertone

Non-adjustable upper A-arms with polyurethane bushings for 1st Gen Camaro Base, RS, SS, and Z28 (1967–1969). Reduces deflection over stock rubber while retaining street manners. Black Hammertone finish.

$627.99

Control Arm

1967–1969 Camaro Lower A-Arms (Polyurethane) – Black Hammertone

Performance lower A-arms for 1st Gen Camaro (1967–1969). Engineered for street performance, drag racing, and pro-touring. Provides 2 additional degrees of caster for improved straight-line stability.

$774.99

Control Arm Kit

1970–1981 Camaro Upper & Lower A-Arm Kit – Red

Complete upper and lower A-arm kit (includes AA014 and AA015) for 2nd Gen Camaro (1970–1981). Heavy-duty 1.25-inch DOM tubing with laser-cut, CNC-formed steel. Red finish. Fits Base, SS, Z28, RS, and LT.

$1,269.99

Control Arm

1993–2002 Camaro Non-Adj. Upper A-Arms (Poly) – Black Hammertone

Non-adjustable upper A-arms with polyurethane bushings for 4th Gen Camaro Base, RS, Z28, and Z28 SS (1993–2002). Direct link between chassis and front wheels — a critical upgrade for track or autocross use.

$414.99

Control Arm

1993–2002 Camaro Upper A-Arms w/ Adj. Rod Ends – Black Hammertone

Adjustable upper A-arms with rod ends for 4th Gen Camaro (1993–2002). Full camber and caster adjustability for precision alignment dialing on the track. Fits Base, RS, Z28, and Z28 SS.

$547.99