Camaro Exhaust Systems: The Complete Buyer's Guide
Performance Buyer's Guide
Camaro Exhaust Systems: The Complete Buyer's Guide
Cat-backs, axle-backs, headers, and more — everything you need to unlock the true sound and performance of your 4th, 5th, or 6th Gen Camaro.
The exhaust is one of the first — and most satisfying — upgrades any Camaro owner makes. Whether you want a street-friendly rumble or an all-out race roar, there's a system built specifically for your generation and engine. This guide covers the full spectrum: axle-back and cat-back systems for pure sound, long-tube and shorty headers for maximum performance gains, and the essential supporting hardware to complete your build. We've pulled together the best active products from the top brands we carry — Billy Boat, Borla, AWE Tuning, aFe, BBK, and American Car Craft — all with confirmed fitment from product data.
Billy Boat Exhaust
Handcrafted, made-to-order cat-back systems for 5th and 6th Gen Camaro — available in polished or black finish. Allow 2–4 weeks for production. No returns on custom orders.
Billy Boat Exhaust
Cat-Back System 5th Gen Camaro SS Sport Cat-Back Exhaust Made-to-order cat-back for 2010–2015 Camaro SS. Available in polished or black finish. Multiple year/finish variants available. From $1,640.00 Shop Now |
Billy Boat Exhaust
Cat-Back System 5th Gen Camaro Z/28 Cat-Back Exhaust (2014–2015) Purpose-built for the 2014–2015 Camaro Z/28. Polished or black finish. Made to order — allow 2–4 weeks production time. From $1,640.00 Shop Now |
Billy Boat Exhaust
Cat-Back System 6th Gen Camaro Cat-Back Exhaust (2016–2024) — NPP Valves Full cat-back for 2016–2024 Camaro, compatible with NPP dual-mode exhaust valves. Polished or black, automatic or manual transmission. From $2,400.00 Shop Now |
Borla
World-renowned stainless steel exhaust systems for 5th and 6th Gen Camaro — choose from the road-friendly S-Type or the aggressive ATAK sound. Fitment varies by factory tip and NPP valve configuration; confirm your setup before ordering.
Borla
Cat-Back System 5th Gen Camaro SS S-Type Cat-Back (2010–2013) Fits 2010–2013 Camaro SS and 2012 ZL1. Single round-tip split rear exit. Not compatible with Ground Effects Package (GFX). S-Type sound with no drone. $2,262.99 Shop Now |
Borla
Axle-Back System 5th Gen Camaro SS ATAK Exhaust — Rear Section (2010–2013) Fits 2010–2013 Camaro SS and 2012–2013 ZL1. Not compatible with Ground Effects Package (GFX). Polished T-304 stainless steel tips. $1,117.99 Shop Now |
Borla
Axle-Back System 6th Gen Camaro SS S-Type Axle-Back w/o NPP (2016–2024) Fits 2016–2024 Camaro SS. For vehicles without factory Dual Mode (NPP) exhaust valves. Classic S-Type sound with no interior drone. $1,508.99 Shop Now |
Borla
Axle-Back System 6th Gen Camaro SS ATAK Axle-Back w/o NPP (2016–2024) Fits 2016–2024 Camaro SS. For vehicles without factory NPP valves. Aggressive ATAK sound with no drone. 2.75" diameter system. $1,508.99 Shop Now |
Borla
Axle-Back System 6th Gen Camaro SS S-Type Quad Tip w/ Dual NPP (2016–2024) Fits 2016–2024 Camaro SS with factory Dual Mode (NPP) exhaust. Quad round/round-large tips with dual exit. Classic S-Type sound signature. $2,890.99 Shop Now |
Borla
Axle-Back System 6th Gen Camaro V6 S-Type Axle-Back (2016–2023) Fits 2016–2023 Camaro LT with V6 engine. For vehicles with single factory tips, not equipped with NPP valves. Polished T-304 stainless steel tips. $1,508.99 Shop Now |
AWE Tuning
Premium T304L stainless steel cat-back and axle-back exhaust systems for 6th Gen Camaro SS, ZL1, and LT1. Touring Edition (refined) and Track Edition (aggressive) sound profiles, plus AFM Valve Simulators to run a full cat-back without a CEL.
AWE Tuning
Axle-Back System 6th Gen Camaro SS Touring Edition Axle-Back — Chrome Silver (2016–2024) Fits 2016–2024 Camaro SS and 2020–2024 LT1. Full 3" T304L stainless steel. Retains factory mid-section. Chrome silver tips. $1,239.99 Shop Now |
AWE Tuning
Cat-Back System 6th Gen Camaro SS Touring Edition Resonated Cat-Back — Quad Chrome Silver (2016–2024) Fits 2016–2024 Camaro SS, 2017–2024 ZL1, and 2020–2024 LT1. Full 3" T304L stainless, resonated design. Incorporates factory NPP dual-mode exhaust valves. $2,833.99 Shop Now |
AWE Tuning
Axle-Back System 6th Gen Camaro SS Track Edition Axle-Back — Diamond Black (2016–2024) Fits 2016–2024 Camaro SS and 2020–2024 LT1. The loudest option in the AWE lineup. Retains factory mid-section for a cost-effective upgrade. Diamond black tips. $741.99 Shop Now |
AWE Tuning
Cat-Back System 6th Gen Camaro SS Non-Res Touring Edition Cat-Back — Quad Chrome Silver (2016–2024) Fits 2016–2024 Camaro SS, 2017–2024 ZL1, and 2020–2024 LT1. Non-resonated for a louder tone. Can convert to resonated later with the AWE conversion kit. $2,734.99 Shop Now |
AWE Tuning
Exhaust Accessories 6th Gen Camaro SS AFM Valve Simulators (2016–2024) Fits 2016–2024 Camaro SS. Required when running a full AWE cat-back system — prevents CEL by simulating the AFM valve motors. Easy plug-and-play install. $98.99 Shop Now |
AWE Tuning
Exhaust Accessories 6th Gen Camaro SS Non-Resonated Conversion Kit (2016–2024) Fits 2016–2024 Camaro SS, 2017–2024 ZL1, and 2020–2024 LT1. Easily swap between resonated and non-resonated configurations on your existing AWE system. $367.99 Shop Now |
aFe
High-flow stainless steel exhaust systems and performance headers for 5th and 6th Gen Camaro. Mandrel-bent construction for maximum flow. Note: Non-CARB compliant — confirm regulations in your state before ordering.
aFe
Cat-Back System 5th Gen Camaro SS MACH Force XP Cat-Back — Polished (2010–2013) Fits 2010–2013 Camaro SS and 2012–2013 ZL1. 3" mandrel-bent 409 stainless steel. Polished tip. Dyno-proven performance gains. $1,532.99 Shop Now |
aFe
Cat-Back System 6th Gen Camaro SS MACH Force XP Cat-Back — Black Tips (2016–2024) Fits 2016–2024 Camaro SS and 2017–2024 ZL1. Incorporates factory NPP dual-mode exhaust valve motors (not included). 3" 304 SS mandrel-bent construction. Black tips. $2,998.99 Shop Now |
aFe
Axle-Back System 6th Gen Camaro SS MACH Force-Xp Axle-Back — Black (2016–2024) Fits 2016–2024 Camaro SS. 2.5" 409 stainless steel axle-back with black tips. Retains factory mid-section. Available in polished or black finish. $1,049.99 Shop Now |
aFe
Headers 6th Gen Camaro SS Twisted Steel 304SS Shorty Headers (2016–2024) Fits 2016–2024 Camaro SS. 1-3/4" – 2-1/8" 304 stainless steel shorty headers. Dyno-proven gains of up to +10 HP and +10 lb-ft TQ. $1,020.99 Shop Now |
aFe
Cat-Back System 5th Gen Camaro V6 MACH Force XP Cat-Back — Black Tip (2010–2014) Fits 2010–2014 Camaro LS and LT (V6 3.6L). Mandrel-bent 409 stainless steel. Gloss black tip. Purpose-built for the V6 engine configuration. $1,684.99 Shop Now |
aFe
Downpipe 6th Gen Camaro 2.0L Turbo Twisted Steel Catted Down-Pipe (2016–2021) Fits 2016–2021 Camaro LS and LT with 2.0L turbocharged engine. 100% TIG-welded. Catted design for EPA compliance. $1,445.99 Shop Now |
BBK
American-made performance exhaust headers, long tubes, X-pipes, and supporting hardware for 4th, 5th, and 6th Gen Camaro. Backed by a 1-year manufacturer warranty. Some headers are Non-CARB compliant — check state regulations before ordering.
BBK
Headers 5th Gen Camaro SS LS3/L99 Shorty Headers — Titanium Ceramic (2010–2015) Fits 2010–2015 Camaro SS and 2012–2015 ZL1. Direct-fit tuned-length shorty headers. CARB compliant (EO D-245-18). $643.99 Shop Now |
BBK
Long Tube Headers 5th Gen Camaro SS LS3/L99 Long Tube Headers w/ Cats — Chrome (2010–2015) Fits 2010–2015 Camaro SS and 2012–2015 ZL1. Full-length long tube headers with high-flow catalytic converters. Chrome finish. $1,738.99 Shop Now |
BBK
Headers 6th Gen Camaro SS 6.2L Shorty Headers — Titanium Ceramic (2016–2024) Fits 2016–2024 Camaro SS, 2017–2024 ZL1, and 2020–2024 LT1. Direct-fit 1-3/4" tuned-length shorty headers. Titanium ceramic coating. $734.99 Shop Now |
BBK
Headers 4th Gen Camaro LT1 Shorty Headers — Titanium Ceramic (1994–1995) Fits 1994–1995 Camaro Z28 and 1994–1995 Pontiac Firebird Formula and Trans Am. Direct-fit shorty headers. CARB compliant (EO D-245-18). $1,094.99 Shop Now |
BBK
Long Tube Headers 5th Gen Camaro V6 Long Tube Headers w/ Cats — Chrome (2010–2011) Fits 2010–2011 Camaro LS and LT. Full-length long tube headers with high-flow catalytic converters. Chrome finish. 1-5/8" primary tubes. $1,352.99 Shop Now |
BBK
Mid-Pipe / X-Pipe 5th Gen Camaro V6 High Flow After-Cat X-Pipe (2010–2015) Fits 2010–2015 Camaro LS, LT, and SS. 2.5" CNC mandrel-bent X crossover pipe for maximum exhaust flow. Compatible with most cat-back systems. $386.99 Shop Now |
American Car Craft
Polished stainless steel exhaust trim rings to dress up the rear valance of your 5th Gen Camaro. In stock and ready to ship.
American Car Craft
Exhaust Trim 5th Gen Camaro Exhaust Trim Rings — Polished Stainless Steel 2-Piece (2010–2013) Fits 2010–2013 5th Gen Camaro. Polished stainless steel trim pieces designed to surround the stock exhaust tips on the rear valance. Available in cropped oval or oval style. From $61.99 Shop Now |